HMB-235 V2

$44.99
(15 reviews) Write a Review
SKU:
HMB-235
HMB-235 V2
  • Aluminum standoffs
  • Internal pocketing for reduced weight
  • Pocketed motors allow for standard motor screws
  • Cut-out on top plate for camera angle
  • XT-60 mounting on bulkhead
  • Refined COG

While the HMB-235 V2 retains much of the character of the original, we have refined and simplified the design, reducing the weight and increasing the functionality. One of the most popular mods we saw to the 235 was a cutout in the top plate for increased camera angle, so we incorporated a relief as well as strengthening the top plate in areas that we had seen break.

Along with increased camera angles, we have noticed a trend towards smaller board cameras such as the HS1177. We have decided to remove the standard plate camera mount and replace it with holes that work with our Universal FPV Camera Mount as well as many other case cameras. Our camera mount is available as an option with the kit for half of the normal selling price.

The main plate has both internal pockets to reduce weight, and motor pockets to allow for standard length motor screws. The center of gravity has been shifted slightly forward to allow for better balance. Curves have replaced corners to increase durability.

Thank you to all who gave us feedback on the original HMB-235, we look forward to hearing your input on this new revision!

 

Warranty Information:

Applies only to main frame and top plate.

If it is unable to fly due to broken main plate or the top plate please email photos of the broken frame to mark@multirc.com

Videos Hide Videos Show Videos

15 Reviews Hide Reviews Show Reviews

  • 5
    Great Frame Design

    Posted by jsosa on Sep 25th 2015

    Extremely Durable Frame Allows you to not worry about crashing and fly more aggressively which helps your skills increase at a much faster rate. So if you want to become a better FPV racer this is the frame to get.

  • 5
    HMB

    Posted by Larry Boggess on Jul 1st 2015

    The HMB-235 is indestructible i had a flip 360 before i destroy it. This frame is the best

  • 5
    Just do it!

    Posted by Scott (Skyjet) on Jun 30th 2015

    So I had to buy one, I also picked up motors, speed controls, and a flip32, all supplied by ReadyToFlyQuads.

  • 5
    Great for Beginners

    Posted by A Harden on Jun 4th 2015

    When starting a new hobby durability is important. This frame has it in spades. IE the flat out runs into trees, propane tank (yea) and the ground many times. Yes it still flies great. Good JOB guys.

  • 5
    HMB Rocks

    Posted by Ringo on Jun 4th 2015

    I saw the HMB (Hold my Beer) frame at SEFF 2015. The Guys at MultiRC.com were very helpful and answered a ton of questions. They told me this frame is virtually indestructible. My 9 year old son was with me and said he wanted to fly it. They asked him if he had ever flown a quad and he said no but he had flown a few planes. They handed him the quad and a radio and said “Go ahead, you can’t hurt it”. He flew it for 4 or 5 minutes, crashed a few times but did not hurt it. That kind of faith in a product and customer service is hard to come by. Building The Quad is very straightforward to build. It comes with a 3d diagram of how everything goes together. It also comes with all the screws, standoffs, zip ties etc. that you need. The arms have small holes predrilled in them for the zip ties to hold the ESCs on. Instead of 4 holes to mount the controller board to, this frame has slots so you can move the controller forward if you wish and then fit the battery on the main deck. The upper deck has a roll cage to protect your Mobius. Flying After building I plugged the Flip32 into the pc, fired up cleanflight and loaded the latest build. I took the quad outside, popped it into a hover and took my hands off the sticks and it just sat there barely drifting with the breeze. With stock settings this thing is easy to fly and if you do crash the most that will happen is you break a prop. It flips in about 3 feet and rolls in about 5 feet. Conclusion I love this quad. I have a couple others but I have always been too scared to try anything aggressive with them like flipping or flying through hoops or anything like that. But with this thing it doesn’t matter. Cartwheel it, pick it up and take off again. Only problem is, if you have a kid you had better buy 2.

  • 5
    Never knew I wanted to fly quads until I flew the HMB.

    Posted by Matt on May 30th 2015

    I love this quad. I have a couple others but I have always been too scared to try anything aggressive with them like flipping or flying through hoops or anything like that. But with this thing it doesn’t matter. Cartwheel it, pick it up and take off again. Only problem is, if you have a kid you had better buy 2. I maybe should mention I got them both the same day. So here I am a brand new quad pilot flying a 235mm race quad on 4s with no experience, but it's okay. Because this frame is so tough I have no fear while flying it. I log around three flights a day (weather permitting) and have bounced it off trees, road signs, parking lots, baseball diamond backstops, and metal playground equipment. The only things I've managed to break are props. My FPV gear, esc's and flight controller are safe and sound inside the frame. Even the battery is protected. The only thing I don't like about this quad is that I don't have two! Oh wait... I do!
    Mark and Shawn are great people and their customer service is out of this world! I can't wait to get my hands on an EVO guys!